How to Avoid Tangles in Fishing Line

Raise your hand if you ever or very often spend more than an hour of your day untangling the fishing lines! Most fishermen face this problem which, in addition to being extremely tedious, discourages them from participating in future days.But do not worry, you do not need years of practice to solve it. Today in PescaCosmar we will teach you to avoid the entanglements in the fishing thread, attacking the main causes of those problems and implementing some tricks.

Why Is Our Line Entangled?

The causes of entanglement are multiple, so there is no definitive answer, you should constantly review the following points, to avoid entanglement in the fishing line.

1. Excess Thread On The Spool

For fishing modes that require tremendous yarn capacity, it is important to have a reel that actually owns it, rather than over yarn loading a reel. If a spool is overloaded with thread, it can not rotate smoothly, nor pick up the thread evenly and with sufficient pressure, causing it to become tangled. So if you need more thread but your reel can not provide it, use another one. Also remember that the capacity of the same reel is reduced as you use a thicker thread.

2. Loading The Thread Into The Uneven Spool

The output of the spool thread should have a smooth and steady rhythm, if the thread has been rolled more than one side, that creates problems during the exit, locking or entangling the line. When loading the thread into the reel bobbin make sure to fill mm to mm from side to side and so on.

Learn here to fill the fishing reel.

3. Loose Load Of The Thread On The Spool

In addition to paying attention to the order during loading, it takes strength and the correct pressure so that the thread is tight, NOT tight. Do not stretch it, just keep the laps loose. If they are loose the bobbin will spin but will not loose the precise amount of thread, excess thread will come out that will automatically become tangled, instead if you squeeze too much, the thread will be damaged, and the bobbin will overload in the rotations.

4. Poor Quality Thread With High Memory

We know that threads with low memory or without memory are the most expensive, however it is worth investing in good quality threads if we do not want to deal with the annoying tangles. The threads with high memory are those that present curls or curves when removing them from the coil, avoid these threads at all costs.

5. Rusty Or Jagged Fishing Rod Rings

Another essential factor in avoiding entanglement in the fishing line is to maintain and care for the rings of our fishing rods. Over time, they may present channels, fractures, jagged and rusty nuisances that prevent the thread from slipping With delicacy, which generates accumulation of thread or locks where there should not be.

6. Reel Coil Rims Split Rusted Or Jagged

Like the rings, the reels also need maintenance and constant care, when the reel coil breaks the edges we can guarantee that you will have more entanglements than you can handle, if this happens change your coil. But it is preferable to give proper maintenance to your reel to prevent that happening.

7. Low Line, Lures And Lead Too Light.

Especially In Surfcasting, If You Want To Send The Line Bass a long distance you need a considerable weight to pull the line as far as possible with the thrust of the throw. If the weight of the rig is very low it will be left behind and will become entangled with the rest of the line. Before firing or laying the lure, test with different plumbing so you know better what the ideal weight your rig should have in every circumstance.

8. Poor Choice Of Thread Type Or Thickness For A Particular Day

You may be told that a fine thread is necessary to deceive certain species, but you must also think, that such fineness can support your reel without entangle the line; Also if you are told that braiding is the best thing to withstand the force of such a species, you should know that if there are too many algae, what you are going to fish is a plot. Have options always on hand, as fishing is not an exact science.

9. Incorrectly Launched

Visit our tutorial surfcasting set to know the correct technique of the launch, it turns out that one of the first causes of entanglement is given by a poortechnique when launching. If the angle of the shaft is not correct, the rings are grooved, or too much thread is released at a higher speed than the rigging. And that ends up in short or long term tangles. On the other hand if the throw has a failure in the execution, it fails the precision and the force causing diverse problems including the entanglements of the fishing line.

10. Wind And Seaweed Conditions Are Excessive

There are other reasons that go beyond our control, such as wind power and increasing algae, if we decide to fish in these adverse conditions, we have to find a way to compensate, using a heavier rig that Prevent our yarn from being manipulated by the wind, or avoid twisted yarns and complex rigging that increase the odds of entanglement when there is algae.

Tricks To Avoid Entanglement In The Fishing Line

In addition to checking the 10 points above, there are other tips you can take into account to minimize entanglement in the fishing line.

1. Do Not Use The Freshly Drawn Wire From The Plastic Coil

Unless you use unsaved threads, we recommend you remove the new threads from their bobbin, stretch them slightly or roll them in another bobbin just as they originally came. That will help get rid of the annoying curls in the line.

2. Do Not Step On The Line

In boat fishing it is often the case that we inadvertently step on the line, whether with the deck, some object or ourselves, remember that the slightest interruption in the exit of the thread, can cause it to become entangled so attentive to the footsteps.

3. Pull Out A Couple Of Meters Of Thread Before The Throw

All the professional fishermen take a few meters of thread before launching, to know better the balance of the rig, only with this they can know if the weight of the rig is the correct one before throwing and thus avoid entanglements. However it is also key to ensure that the rig has a certain advantage and does not become tangled with the thread.

4. Keep The Threads Clean

When we clean our threads with fresh water as we collect them, we prevent sand, saltpeter and algae from wreaking havoc on our reel, thus avoiding entanglements and lengthening the life of our threads.

How To Undo The Entanglement Of The Line?

Even paying attention to all the advice we have given you, a tangle can be presented at any time in an unforeseen way and if you do not want to spend hours unraveling, we recommend the following:

Do not get impatient or despair, a knot does not break down with violence but with intelligence. It is very likely that the entanglement is very slight even though you see an immense tangle in your hands.

First locate the ends of the thread , that is to say the one that goes to the hook, and the one that goes towards the reel and separate them each looking at the opposite end.

Then focus on the most problematic section, in other words, the one that looks the most tight. With delicacy and little strength loosens the knots that may have been produced. Try to follow the track to each strand and untie those that interrupt the passage of the ends of the line.

Try stretching the ends to discard the excess thread that is no longer entangled and continue loosening the knots, until there are none left.

For Plots Inside The Reel Follow These Instructions:

“What do you think our tips to avoid the entanglements in the fishing line? We hope that they help you in your next days so that you can enjoy them to the maximum. See you soon and good fishing.”

Gallery

301 Moved Permanently

301 Moved Permanently

Source: pearlsofprofundity.wordpress.com

AVOIDING WIND KNOTS WITH BRAID – Active Angling New Zealand

AVOIDING WIND KNOTS WITH BRAID – Active Angling New Zealand

Source: activeanglingnz.com

How To AVOID Wind Knots and Tangles With Braided Line

How To AVOID Wind Knots and Tangles With Braided Line

Source: www.saltstrong.com

4 Tips to Prevent Backlashes

4 Tips to Prevent Backlashes

Source: www.liveoutdoors.com

How To Avoid Getting Your Fishing Line Tangled Up

How To Avoid Getting Your Fishing Line Tangled Up

Source: bigfrog104.com

Best 25+ Shimano reels ideas on Pinterest

Best 25+ Shimano reels ideas on Pinterest

Source: www.pinterest.com

Tips To Prevent Bait Casting Backlash

Tips To Prevent Bait Casting Backlash

Source: www.pureinstincthunting.com

Spey Casting Tip

Spey Casting Tip

Source: deneki.com

How To AVOID Wind Knots and Tangles With Braided Line

How To AVOID Wind Knots and Tangles With Braided Line

Source: www.saltstrong.com

How to Spool a Spinning Reel | Spool Line

How to Spool a Spinning Reel | Spool Line

Source: www.youtube.com

Shooting lines | Global FlyFisher

Shooting lines | Global FlyFisher

Source: globalflyfisher.com

How To AVOID Wind Knots and Tangles With Braided Line

How To AVOID Wind Knots and Tangles With Braided Line

Source: www.saltstrong.com

How to tie a mono twisted boom to prevent tangles — Sea Angler

How to tie a mono twisted boom to prevent tangles — Sea Angler

Source: www.seaangler.co.uk

Bass Fishing: Do You Make These 7 Mistakes? – Part 1 …

Bass Fishing: Do You Make These 7 Mistakes? – Part 1 ...

Source: blog.havalon.com

Turn-it 90: Avoiding Tangled Casts

Turn-it 90: Avoiding Tangled Casts

Source: tforods.com

FAQ Tackle – Leads, Carp Species and Particles

FAQ Tackle – Leads, Carp Species and Particles

Source: carptacklereview.wordpress.com

How to Prevent Wind Knots and Tangles in Braided Fishing …

How to Prevent Wind Knots and Tangles in Braided Fishing ...

Source: www.sportfishingmag.com

How To AVOID Wind Knots and Tangles With Braided Line

How To AVOID Wind Knots and Tangles With Braided Line

Source: www.saltstrong.com

Fly-Fishing Line Management

Fly-Fishing Line Management

Source: www.saltwatersportsman.com

How To AVOID Wind Knots and Tangles With Braided Line

How To AVOID Wind Knots and Tangles With Braided Line

Source: www.saltstrong.com